Avic f-series firmware update

Press the " Menu " button and touch the " Settings " tab. Step 4 Please wait for the firmware update to be installed - this should take approximately 10 minutes. Check your SD card to confirm that the SD card contains the correct folder and files in the correct format.

Uploader: Dilar
Date Added: 3 August 2016
File Size: 18.31 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 8100
Price: Free* [*Free Regsitration Required]





Then pause 10 seconds, re-insert the SD card, and touch " Software Update " again. The system will automatically start the update process in one minute. Before Downloading the Firmware Updates Please check your system version number by doing the following to determine whether your system has already been updated with the new firmware updates:. Failure to do so could cause data stored onto your navigation system to be permanently lost.

Step 11 After updating all TTS files, turn off your vehicle and turn on again, and wait for your system to boot up. If you have any difficulty carrying out these instructions, please contact the Pioneer Customer Service Center at The system will automatically reboot after the firmware update is completed.

Step 9 If your original firmware version number was 1.

Software & Firmware Downloads

Then English TTS file will be updated immediately. Only transfer the 3 files onto the SD card; do not transfer the folder containing the 3 files onto the Avoc card. Check your SD card to confirm that the SD card contains the correct folder and files in the correct format.

Confirming that the Firmware Update was Successfully Installed. Step 12 Please follow the steps below to confirm the update process was successful:. Press the " Menu avjc button and touch the " Settings " tab.

While your navigation system is being updated with the new firmware, do NOT turn off the power to the navigation system.

Software & Firmware Downloads | Pioneer

Download the system firmware update Zipfile onto your computer by clicking here. Questions If you have any questions, please contact the Pioneer Customer Service Center at If you cannot select " from SD ", please check your system and SD card as follows:.

Step 4 Please wait for the firmware update to be installed - this should take approximately 10 minutes. Touch the " English US Samantha: Next, turn ON your vehicle and navigation system.

Once the Zipfile is decompressed, locate and open the folder named " Bluetooth Update ". Check your system version again to confirm the necessity of this firmware update. TTS ", please check your system and SD card as follows:. The location where you save the downloaded Zipfile should be accessible and easily remembered. Check your SD card to confirm that the SD card contains the correct file in the correct format.

After your system has rebooted, press the "Menu" button and touch the "Setting" tab.

Transfer the 3 files in this folder onto the top layer folder of your SD card. Step 7 Touch " Software Update " to update the Bluetooth firmware. Pioneer service representatives are available Monday through Friday, 9: Then, touch the "System Setting" button and push the "Language" button.

After you have downloaded the Zipfile, locate it on your computer and double click to decompress it. Refer to the firmware f-seriess you previously wrote down; If your original firmware version was 1. There are two choices:. Step 5 After your aviic has rebooted itself, press and hold down the system "reset" button which is located just to the left of the "eject" button for five 5 seconds and release it.

Select " System Settings ", and touch the " Screen Calibration " button.

4 thoughts on “Avic f-series firmware update

Leave a Reply

Your email address will not be published. Required fields are marked *